Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 53

■Searching modules on the network
For a connection using a switching hub, a list of modules that can be searched for will appear by clicking the [Find] button on
the detailed setting window.
Search target modules are as follows.
• FX5 CPU module connected to the same switching hub as the engineering tool
• FX5 CPU module connected to cascade-connected switching hub
If the connected FX5-CCLGN-MS does not appear in the list after searching for the modules on the network, check the
following items.
• Search cannot be performed if it is disabled with the IP filter.
• Modules connected via a router cannot be searched for.
• If modules with the same IP address are listed, correct the setting of the IP address in "Network Configuration Settings"
under "Basic Settings" of the master station.
• If the service processing load of the search-target FX5 CPU module is high, a search for the corresponding module may not
be performed. If the search cannot be performed, increase the response waiting time in the search dialog, and execute the
search again.
4 FUNCTIONS
4.4 Ethernet Connection
4
51