Remote Station Settings - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

10.
Set the items in "Application Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [FX5-CCLGN-MS]  [Application Settings]
11.
Click the [Apply] button.
12.
Write the set parameters to the FX5 CPU module on the master station. Then, reset the FX5 CPU module or power off
and on the system.
[Online]  [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
Page 89 PARAMETER SETTINGS

Remote station settings

Set the setting of the IP address set in "Network Configuration Settings" of the master station.
9 PROGRAMMING
132
9.3 Examples of Communication with Authentication Class A Remote Stations