Structure With Modules On Cc-Link Ie Tsn Only - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Structure with modules on CC-Link IE TSN only

Connection with modules on CC-Link IE TSN only
■Line topology
The network is configured in a line topology. A TSN switching hub is not required.
When an error occurs in a slave station, the stations connected after the faulty station will be disconnected.
No.0 No.1
No.0: Master station
No.1, No.2: Local station
No.3, No.4: Remote station
■Star topology
The network is configured in a star topology via a TSN switching hub. This allows devices to be added easily.
TSN switching hub
No.0 No.1
No.0: Master station
No.1: Local station
No.2: Remote station
Even when an error occurs in a slave station, a data link can be continued with the stations that are operating normally.
■Coexistence of line and star topologies
Line and star topologies can be mixed in the same network configuration.
TSN switching hub
No.0
No.3
No.0: Master station
No.1, No.2: Local station
No.3, No.4: Remote station
No.2
No.2
No.1 No.2
5.1 Structure of Authentication Class B Devices and Ethernet Devices
No.3 No.4
No.4
5 SYSTEM CONFIGURATION
5
69