Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 153

Selected Station Communication Status Monitor
Status of the station selected in "Network Status" is displayed.
■When a station where an error has occurred is selected
(1)
(3)
(5)
(6)
(7)
No. Description
(1) Indicates the station number and operating status.
• Station number No error (light blue): Normal operation
• Station number Error (yellow): Error (Data link is continued)
• Station number Error (red): Error (Data link is stopped)
(2) Displays the network type.
(3) Displays a MAC address.
(4) Displays an IP address.
(5) Click this button to check error details. Take actions according to the description displayed in "Error Factor" and "Troubleshooting".
(6) The LED status of a module and communication status of P1 and P2 is displayed. ( Page 19 LED indication)
(7) Status of the Ethernet cables connected to P1 and P2 is displayed.
*1 When 00-00-00-00-00-00 is displayed as a MAC address, the status of the selected station cannot be checked with the selected station
communication status monitor. Connect the engineering tool directly to the station where the error has occurred, and check the error
details on the "System Monitor" window.
■When a selected station is not available for communication status monitor
The information of devices are not displayed. The "Error details" window (detailed information, error factor, troubleshooting) is
displayed.
*1
(2)
(4)
10 TROUBLESHOOTING
10.3 Checking the Network Status
10
151