Connection Device Information; Slave Station Setting - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Connection device information

Set the information of the connected device.
Item Description
Authentication Set the authentication Class of connected devices.
Class Setting
Precautions
In the case of "Authentication Class B Only" and "Mixture of Authentication Class B/A or Authentication Class A Only" system
configuration, different restrictions apply. ( Page 64 SYSTEM CONFIGURATION)

Slave station setting

Set items related to the slave station.
Item Description
Disconnection Set the number of consecutive communication failures until a slave station is considered disconnected.
Detection
Setting
Precautions
The disconnection detection setting does not necessarily guarantee that the disconnection is performed according to the
number of times set. When disconnection is detected, a bit of the disconnected station in 'Data link status of each station'
(SW00B0 to SW00B7) turns on. However, the time required this may be at least four times the time required for the number of
consecutive communication failures set in the disconnection detection setting.
7 PARAMETER SETTINGS
96
7.3 Basic Settings
Setting range
• Authentication Class B only
• Mixture of Authentication Class B/A or
Authentication Class A Only
(Default: Authentication Class B only)
Setting range
• 2 times
• 4 times
• 8 times
(Default: 4 times)