Advertisement
4 NXDN function
Scan Function (Dwell Time)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Scan Function (Power-on Scan)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Scan Function (Revert Channel)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
During the scan, the scan pauses when the PTT switch is pressed to transmit. Dwell Time is the time from when
the transceiver completes transmitting until the transceiver resumes scanning.
The transceiver activates Talkback according to the configuration in Revert Channel while the time configured
in Dwell Time elapses.
-
-
Dwell Time : Edit > Scan Information > Scan
'■ Standard model
■ Basic model
Power-on Scan is the function to start the scan automatically when the transceiver is turned on.
-
-
Power-on Scan : Edit > Scan Information > Scan
'■ Standard model
■ Basic model
Revert Channel is the Zone-channel which is used when the transceiver transmits by pressing the PTT switch
during the scan.
The Revert Channel is displayed according to the configuration of Revert Channel Display.
Configuration
Last Called + Selected
The transceiver transmits on the last-called Zone-channel by pressing the PTT
switch during the scan.
If the Zone-channel is changed, the transceiver transmits using the new channel
after the Zone channel is changed until the transceiver receives another call.
Selected
The transceiver transmits on the new channel after the Zone-channel is changed
regardless of the scan status.
Selected + Talkback
During the scan, the transceiver transmits on the new Zone-channel after the
zone-channel is changed.
While the scan is paused, the transceiver transmits on the Zone-channel where
the transceiver pauses scanning.
Priority 1
The transceiver transmits on a Priority 1 regardless of the scanning status.
Priority 1 + Talkback
The transceiver transmits on a Priority 1 during the scan.
While the scan is paused, the transceiver transmits on the Zone-channel where
the transceiver pauses scanning.
Priority 2
The transceiver transmits on a Priority 2 regardless of the scanning status.
Priority 2 + Talkback
The transceiver transmits on a Priority 2 during the scan.
While the scan is paused, the transceiver transmits on the Zone-channel where
the transceiver pauses scanning.
-
If Revert Channel Display is enabled, a Revert Channel always appears on the transceiver display during the
scan.
Revert Channel : Edit > Scan Information > Scan
-
-
Priority
Description
-
98
Advertisement
