Advertisement
5 ANALOG function
Making an Individual Call (Individual Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making a Group Call (Group Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making a Group Call (Group ID (List))
Type
Description
Operating the transceiver
Note
Configuration using FPU
Setting the maximum number of times resending FleetSync/MDC-1200 data (Number of Retries)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Maximum ACK Wait Time
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
Fleet, ID, ID Name, Type, Alert Tone (Selcall, Paging), Alert LED (Selcall, Paging) :
Edit > FleetSync > ID List
ID Type, ID, Fleet ID, Group ID, ID Name, ACK Request, Alert Tone (Selcall, Call Alert), Alert LED (Selcall,
Call Alert) :
Edit > MDC-1200 > ID List
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
If the transceiver does not receive the acknowledgment after the transceiver sends data and the time configured
for Maximum ACK Wait Time elapses, the transceiver resends data. Number of Retries is the number of times
for the transceiver to resend data. A smaller number can be configured if there is good communicating
conditions, and a larger number can be configured if there are inferior communicating conditions.
-
-
Number of Retries :
Edit > FleetSync > Parameter
Edit > MDC-1200 > Parameter
Maximum ACK Wait Time :
Edit > FleetSync > Parameter
Edit > MDC-1200 > Parameter
'■ Standard model
■ Basic model
Maximum ACK Wait Time is the length of time that the transceiver stands by to receive the acknowledgment
after the transceiver sends data.
If the transceiver does not receive the acknowledgment within the time configured for Maximum ACK Wait Time,
the transceiver resends data.
-
In FleetSync, It is also used for the standby time interval in the data channel upon moving to the data channel
using GTC.
In FleetSync, The receiving transceiver stands by to receive the next data for the time configured for
Maximum ACK Wait Time after receiving the previous data.
Maximum ACK Wait Time :
Edit > FleetSync > Parameter
Edit > MDC-1200 > Parameter
-
-
-
-
-
119
Advertisement
