Advertisement
5 ANALOG function
Testing or Adjusting the Transmit and Receive Capabilities of the Transceiver (PC Tuning Mode)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Using VOX (VOX Function)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Reading the Log Information of the Transceiver (Field Support) (Save Log Data)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Data Transmit Modulation Delay Time
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making an Individual Call (Individual Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Using FleetSync ID to Initiate a Selective Call (Paging Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
Data Transmit Modulation Delay Time is the time interval from the point when transmission starts up to the
point when modulation of the MSK data starts during data transmission by the transceiver.
Data Transmit Modulation Delay Time is required to start modulation of the MSK Data after the transmitted
signal is stabilized. However, it may be difficult to establish data communications when the transmit frequencies
and receive frequencies are widely separated or the transceiver is always used in extremely cold areas. In such
cases, Data Transmit Modulation Delay Time must be extended in order to improve the reliability of data
communications.
-
-
Data Transmit Modulation Delay Time :
Edit > FleetSync > Parameter
Edit > MDC-1200 > Parameter
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
-
-
-
-
-
-
109
Advertisement
