Advertisement
3 DMR function
3 DMR function
Displaying the Voltage Value of a Battery When the Transceiver Is Turned ON (Power-on (Battery Voltage))
Type
Description
Operating the transceiver
Note
Configuration using FPU
Displaying the LED When the Transceiver Is Turned ON (Power-on (LED))
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
□ Basic model
Battery Voltage is the function to display the voltage value of a battery when the transceiver is turned ON.
-
Battery Voltage : Edit > Optional Features > Optional Features 1 > Common 2 > Power-on
'■ Standard model
■ Basic model
Setting the color of the LED that lights up when the power is on, for example, groups can be color coded when
grouping is necessary.
Setting the color of the LED that lights up for about 2 seconds at startup.
・ Yellow
・ Purple
・ Blue
・ Light Blue
・ Red
・ Green
・ White
-
For Basic Model, LED Blinking Color of Error Mode are summarize as below.
Error
Kill
Unprogramming mode
Key Fail
Data Error
Voice Data Error
ESN Error
Feature Error
LED : Edit > Optional Features > Optional Features 1 > Common 2 > Power-on
Turn the [Power/Volume Knob] clockwise from the power-off
position.
Transceiver behavior :
The transceiver is turned on.
Power-on Tone sounds.
All LCD segments and icons light up for a minimum of 500ms
or until the Power-on Tone has finished sounding, whichever
is longer.
Transceiver behavior :
The voltage value is displayed after the "BATT".
(The detected voltage value is 7.00V)
-
LED Blinking Color of Error Mode
Blinking Color
Yellow
Yellow
Yellow
Yellow
Yellow
Red
Red
4
Purple
Blue
Green
Light Blue
-
Purple
Blue
Advertisement
