Advertisement
3 DMR function
Making an Individual Call (Unit ID List)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Using DMR ID to Initiate a Selective Call (Paging Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
If making Individual Calls, the desired Unit IDs need to be preconfigured in the transceiver using KPG-D6/ D6N
prior to use of the transceiver. A maximum of 1,000 Unit IDs can be configured for Unit ID List.
Configuration
ID
A Unit ID can be configured in the range between 1 and 16776415.
ID Name
The caller's ID Name is configured. A maximum of 8 characters can be configured
for the ID Name.
If the ID Name of the transmitting transceiver is registered in the Individual ID List,
the ID Name appears when the transceiver receives a call.
After that, the received Unit ID Name appears upon receipt of the Unit ID Name by
Over-the-Air Alias while receiving a call.
If the transceiver cannot receive the Unit ID Name, the stored ID Name appears if
the ID Name is stored for the Unit ID stored in the transceiver. The Unit ID number
appears if the above conditions are not satisfied.
Type
The permission or inhibition of transmission of the receiving party can be
configured.
An ID for which "Receive Only" is configured for Type does not appear on the ID
selection display in Individual Call Mode, and a user cannot select the ID in
Individual Call Mode.
If the transceiver receives a call from an ID for which "Receive Only" is configured
for Type, the caller's ID Name appears. In this case, a user cannot initiate a call to
the party even if the user attempts to respond by pressing the PTT switch.
Alert Tone
The type of tone sounding from the transceiver can be configured for an Individual
(Individual)
Call from the Unit IDs registered in the Unit ID List.
Alert Tone
The type of tone sounding from the transceiver can be configured for a Paging Call
(Paging)
from the Unit IDs configured in the Unit ID List.
Alert LED (Individual)
The color of flashing LED can be configured for an Individual Call from the Unit IDs
configured in the Unit ID List.
Alert LED (Paging)
The color of flashing LED can be configured for a Paging Call from the Unit IDs
configured in the Unit ID List.
-
-
ID, ID Name, Type, Alert Tone (Individual, Paging), Alert LED (Individual, Paging) :
Edit > DMR > Unit ID List
'■ Standard model
■ Basic model
Paging Call is the function to initiate a call to a target party.
Use it when you want to call a target transceiver without communicating.
Paging Call from Individual Call Mode
(Standard model Only)
Press the PF_BTN[Call 1] to PF_BTN[Call 6]
-
PF_BTN[Call 1~6]
Edit > Button Assignment > Side, Front
Unit ID List
Description
-
Enter Individual Call Mode, select the ID from ID List or
manual input the ID that want to perform a paging call.
Press [Side 2].
Transceiver behavior :
"PAGING" displayed, and then Paging Call is transmitting to
the selected ID.
Transceiver behavior :
When ACK is received, "COMPLETE" is displayed, and
Complete Tone is sounded to complete Paging Call. After 1
second, it returns to channel display.
24
Advertisement
