Advertisement
3 DMR function
Checking the Firmware Version (Transceiver Information)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Testing or Adjusting the Transmit and Receive Capabilities of the Transceiver (PC Test Mode)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Testing or Adjusting the Transmit and Receive Capabilities of the Transceiver (PC Tuning Mode)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
□ Basic model
Transceiver Information Mode is the function to display the version of the firmware written in the transceiver and
the corresponding checksum.
-
For Basic Model, Transceiver Information can be checked in the following FPU.
Transceiver Information : Tools > Transceiver Information
Transceiver Information : Edit > Optional Features > Optional Features 1 > Common 2 > Mode
'■ Standard model
■ Basic model
PC Test Mode can be used to test transmit and receive capabilities of the transceiver by using KPG-D6/ D6N.
To test or adjust the transceiver in each mode, the transceiver and a PC with KPG-D6/ D6N installed need to be
connected by using the programming cable.
Refer to the service manual for operating the transceiver in PC Test Mode, and instructions on how to adjust
transmit and receive capabilities.
-
'■ Standard model
■ Basic model
PC Tuning Mode can be used to adjust transmit and receive capabilities of the transceiver by using KPG-D6/
D6N.
To test or adjust the transceiver in each mode, the transceiver and a PC with KPG-D6/ D6N installed need to be
connected by using the programming cable.
Refer to the service manual for operating the transceiver in PC Tuning Mode, and instructions on how to
adjust transmit and receive capabilities.
-
-
Enter Test Mode using the FPU.
Transceiver behavior :
Test Mode is entered.
Select a tuning item from the list of tuning items.
Transceiver behavior :
Tuning Mode is entered.
16
Advertisement
