Advertisement
3 DMR function
Indication and Sound in Emergency Mode (Emergency Display)
Type
Description
Operating the transceiver
Note
Configuration using FPU
ID Sent When Emergency Mode is Activated (Emergency ID (DMR Conventional) (DMR ID))
Type
Description
Operating the transceiver
Note
Configuration using FPU
ID Sent When Emergency Mode is Activated (Emergency ID (DMR Conventional) (ID Type))
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
□ Basic model
Emergency Display is the function to display the channel configured in Emergency Zone-channel when in
Emergency Mode or to retain the display appearance before the transceiver enters Emergency Mode.
Configuration
Selected Channel
The currently selected channel is retained on the display even if the transceiver
enters Emergency Mode.
Emergency Channel
A channel configured in Emergency Zone-Channel appears when the
transceiver enters Emergency Mode.
Emergency Mode Display (Emergency
Display = Selected Channel)
Enter Emergency
Emergency Mode Display (Emergency
Display = Emergency Channel)
Enter Emergency
-
Emergency Display ： Edit > Emergency Information > General
'■ Standard model
■ Basic model
The Emergency ID can be sent each time the transceiver starts automatic transmission and reception in
Emergency Mode.
Emergency ID Type is the type of DMR ID used in Emergency Mode.
Emergency DMR ID is the DMR ID used for transmission and reception in Emergency Mode.
-
-
DMR ID ： Edit > Emergency Information > Profiles > Page 1 > Emergency ID (DMR Conventional)
'■ Standard model
■ Basic model
The Emergency ID can be sent each time the transceiver starts automatic transmission and reception in
Emergency Mode.
Emergency ID Type is the type of DMR ID used in Emergency Mode.
Emergency DMR ID is the DMR ID used for transmission and reception in Emergency Mode.
-
-
ID Type ： Edit > Emergency Information > Profiles > Page 1 > Emergency ID (DMR Conventional)
Emergency Display
Description
・ Press and hold PF_BTN[Emergency].
Transceiver behavior :
・ Emergency Mode is entered.
・ The currently selected channel is displayed.
・ Press and hold PF_BTN[Emergency].
Transceiver behavior :
・ Emergency Mode is entered.
・ The Emergency Zone-Channel is displayed.
-
-
41
Advertisement
