Advertisement
3 DMR function
Preventing Reception of a Group Call While the Transceiver Is Receiving an Individual Call (Ignore Group Call
during Individual Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making an Informative Group Call (Broadcast Group Call) (Broadcast Group Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Ignore Group Call during Individual Call is the function that prevents receipt of a Group Call if receiving an
Individual Call.
This function is used to prioritize the receipt of Individual Calls.
If this function is enabled, the transceiver cannot receive a Group Call (including data communications) while
receiving an Individual Call and the Auto Reset Timer is counting down.
-
Even if this function is enabled, the following Group Calls can be received.
A Group Call using All Group ID
A Group Call for Emergency
Ignore Group Call during Individual Call : Edit > DMR > General
'■ Standard model
■ Basic model
Broadcast Group Call can be used to engage in one-way informative group voice calls by initiating a call to a
group.
The transceiver can initiate a call to the transceivers having the same Group ID by specifying the Group ID.
Broadcast Group Call
This Function is DMR only.
PF_BTN[Broadcast] ： Edit > Button Assignment > Side, Front, Menu
PF_BTN[Menu] ： Edit > Button Assignment > Side, Front, Menu
-
Press the PF_BTN[Broadcast] or enter the Menu Mode by
pressing the PF_BTN[Menu], then turn on broadcast.
Transceiver behavior :
Tone A sounds, display "BCST ON" for 1 sec and Broadcast
Group Call will be On.
Enter the Group Call Mode, select the ID to send from the
Group ID List.
Press [PTT].
Transceiver behavior:
Broadcast Group Call for the selected ID.
28
Advertisement
