Advertisement
5 ANALOG function
Using Voice Guidance (Voice Announcement)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Reducing Battery Consumption (Battery Saver)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Using the GPS Function (GPS Function)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Remote Operation by Radio Communication (Remote Control)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
Battery Saver allows the transceiver to reduce power consumption by receiving intermittently.
The transceiver receives intermittently when there is no carrier and no button is pressed for 5 sec or more, or
when the transceiver is in the following states.
When there is a carrier, but the QT tone or DQT code does not match the tone or code preconfigured for the
transceiver and no button is pressed for 5 sec or more.
Extension of the intervals for intermittent reception may reduce the battery consumption; however, interruptions
to introductory parts of received audio may occur. To use Battery Saver effectively, there are systemic issues to
consider, for instance, the duration from when the transceiver starts transmitting until the transceiver starts
sending audio.
Intervals for intermittent reception are as follows.
Save
Off
Off
Short
200 ms
Medium
400 ms
Long
800 ms
-
Battery Saver is not activated while the transceiver is scanning.
Longer intervals of intermittent monitoring may extend the battery life, but these settings may cause the
transceiver to fail to monitor the beginning of the received signal. If Battery Saver is enabled, you must take
into account the length of time from when the transceiver starts transmitting until a user actually begins
speaking.
Battery Saver : Edit > Optional Features > Optional Features 1 > Common 3 > Battery
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
-
Duration of the Battery Saver
No Carrier
Inconsistent Status of QT tone or DQT code
Off
400 ms
800 ms
1600 ms
-
-
-
107
Advertisement
