Advertisement
4 NXDN function
Indication and Sound in Emergency Mode (Emergency Text/ Text)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Indication and Sound in Emergency Mode (TX/RX LED in Emergency)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
□ Basic model
Emergency Text is the function to display the text on the transceiver display while in Emergency Mode.
If this function is enabled, the text configured in Text appears on the display when the transceiver enters
Emergency Mode.
Emergency Mode Display (Emergency Text =
Disable, Emergency Display = Selected
Channel)
Enter Emergency
Emergency Mode Display (Emergency Text =
Enable, Text = "EMG", Emergency Display =
Selected Channel)
Enter Emergency
-
Emergency Text, Text :
Edit > Emergency Information > General
'■ Standard model
■ Basic model
TX/RX LED in Emergency is the function to light the Transmit LED when the transceiver transmits in
Emergency Mode and light the Busy LED when the transceiver receives in Emergency Mode.
The transceiver behaves as follows depending on the TX/RX LED in Emergency configuration.
If the TX/RX LED in Emergency is enabled:
While in Emergency Mode, the Transmit LED is on during data transmission, and the Busy LED is on during
data receipt.
If TX/RX LED in Emergency is disabled:
While in Emergency Mode, the Transmit LED is off during data transmission, and the Busy LED is off during
data receipt.
-
-
TX/RX LED in Emergency : Edit > Emergency Information > Profiles > Page 2 > Option
Press and hold PF_BTN[Emergency].
Transceiver behavior :
Emergency Mode is entered.
The currently selected channel or Emergency Zone-Channel
is displayed depending on the Emergency Display setting.
Press and hold PF_BTN[Emergency].
Transceiver behavior :
Emergency Mode is entered.
The emergency text configured in "Text" is displayed.
Press and hold PF_BTN[Emergency].
Transceiver behavior :
Emergency Mode is exited.
The emergency text display will be turned off.
-
90
Advertisement
