Advertisement
3 DMR function
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Dropout Delay Time)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Dwell Time)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Quick Site Roaming Level)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Standard Site Roaming
Level)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Site Roaming Resume
Level)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
If the transceiver receives a synchronization signal or call from the repeater during Site Roaming, Site Roaming
pauses.
Dropout Delay Time is the length of time from when the transceiver finishes receiving signals until the
transceiver resumes Site Roaming.
-
If the received signals disappear or the color code does not match, Dropout Delay Time is activated.
After the length of time configured in Dropout Delay Time elapses, the transceiver resumes Site Roaming.
Dropout Delay Time ： Edit > Scan Information > Site Roaming (DMR) > Timer
'■ Standard model
■ Basic model
When the transceiver starts transmitting by pressing the PTT switch during Site Roaming, Site Roaming pauses.
Dwell Time is the length of time from when the transceiver terminates transmission until the transceiver
resumes Site Roaming.
After the transceiver terminates the transmission, Dwell Time is activated.
After the length of time configured in Dwell Time elapses, the transceiver resumes Site Roaming.
-
-
Dwell Time ： Edit > Scan Information > Site Roaming (DMR) > Timer
'■ Standard model
■ Basic model
Quick Site Roaming is the function to allow Site Roaming to behave faster when the transceiver is in an area
with a strong signal.
If the transceiver receives a signal with a level higher than the value configured in Quick Site Roaming during
Site Roaming, the channel becomes the Revert Channel.
In this case, Link Delay Time becomes disabled, and if the Color Code matches, the transceiver unmutes the
speaker.
-
-
Quick Site Roaming : Edit > Scan Information > Site Roaming (DMR) > Roaming Level
'■ Standard model
■ Basic model
Standard Site Roaming is the function to allow Site Roaming to behave faster when the transceiver is in an
area with a strong signal.
The transceiver searches for a signal with a level higher than the value configured in Standard Site Roaming
during Site Roaming.
-
-
Standard Site Roaming : Edit > Scan Information > Site Roaming (DMR) > Roaming Level
'■ Standard model
■ Basic model
Site Roaming Resume is the threshold value of the RSSI level used for determining whether to resume Site
Roaming according to the RSSI level for the signal received by the transceiver.
If the RSSI level of the received signal is lower than the level configured in Site Roaming Resume while the
transceiver remains on the channel synchronized by Site Roaming, Dropout Delay Time is activated.
-
-
Site Roaming Resume : Edit > Scan Information > Site Roaming (DMR) > Roaming Level
-
-
-
-
-
37
Advertisement
