Advertisement
4 NXDN function
Initiating an Individual Call After Ensuring That the Target Party Is Available for Communications (Individual Call
Acknowledge Request)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Individual Call Acknowledge Request is the function that allows a user to distinguish whether or not the
receiving transceiver is available to communicate so as to initiate an Individual Call in an NXDN Conventional
system.
If Optional Signaling LED is enabled, yellow LED will blink.
Individual Call Acknowledge Request, Call Request Tone, Automatic Response, Incoming Reset Time,
Initiating Reset Time :
Edit > NXDN > Conventional > Individual Call Acknowledge Request
Call Processing Tone, Call Processing Tone Delay Time :
Edit > NXDN > Conventional > Individual Call Acknowledge Request > Call Processing Tone
Optional Signaling LED : Edit > NXDN > Conventional
Select the ID to be called from the Unit ID List or Stack Mode.
Press [PTT] or [Side 2].
Transceiver behavior :
ACK Request message is sent to the selected ID.
At this time, "CALLING" are displayed.
Transceiver behavior :
When ACK is received from the called party, if Call in
Progress Tone is enabled, Call in Progress Tone will sound,
"CALLING" display will be cleared, and Individual Call
transmission will be possible.
When ACK is received while [PTT] is pressed, if PTT Proceed
Tone is enabled, PTT Proceed Tone will sound, and Individual
Call transmission is started.
76
Advertisement
