Advertisement
3 DMR function
Automatically Transmitting and Receiving in Emergency Mode (Emergency Microphone Sense)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Emergency Mode (Placing the Transceiver in Emergency Mode Using the Lone Worker Function)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Configuration Related to Transmission and Reception in Emergency Mode (Emergency Mode Type)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Configuration Related to Transmission and Reception in Emergency Mode (Emergency Profile)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Emergency Microphone Sense is the function used to adjust the microphone input sensitivity in Emergency
Mode.
In Emergency Microphone Sense, the microphone sensitivity can be configured within the following range:
6 dB, 4 dB, 2 dB, 0 dB, -2 dB, -4 dB, -6 dB, -8 dB, -10 dB, -12 dB, -14 dB, -16 dB, -18 dB, -20 dB
The appropriate level of microphone sensitivity for normal operation is 0 dB. Based on this level, the parameter
of the microphone sensitivity can be configured.
-
-
Emergency Microphone Sense ： Edit > Emergency Information > General
'■ Standard model
■ Basic model
Lone Worker is the function that automatically places the transceiver in Emergency Mode if the transceiver is
not operated for a certain period of time.
If the transceiver is placed in Lone Worker Mode while the user has a task at a dangerous place, for instance,
the transceiver automatically enters Emergency Mode and notifies a base station of the emergency status
because a user cannot operate the transceiver due to an accident.
-
-
Lone Worker Type, Lone Worker Interval, Duration of Lone Worker Tone :
Edit > Emergency Information > General > Lone Worker
'■ Standard model
■ Basic model
Emergency Mode Type is the function to determine whether the received audio or various tones are muted
while the transceiver is in Emergency Mode.
Configuration
Silent
The transceiver mutes the received audio and various tones while in Emergency
Mode.
Audible
The transceiver emits the received audio and various tones in the same manner
as in normal mode even while in Emergency Mode.
-
-
Emergency Mode Type ： Edit > Emergency Information > Profiles > Page 2 > Option
'■ Standard model
■ Basic model
The transceiver can have a maximum of 8 configurations related to transmission and reception in Emergency
Mode as the Emergency Profile. By allocating Emergency Profile to each zone or channel, the Emergency
behavior of the transceiver can vary depending on the zone or channel.
The functions that can be configured as an Emergency Profile are as follows:
・ Emergency Channel Type
・ Emergency Zone-Channel
・ Emergency Mode Type
・ Emergency Cycle
・ Locator Tone at TX-start
・ Transmit Duration
・ Locator Tone at TX-end
・ Receive Duration
・ TX/RX LED in Emergency
-
-
Emergency Profile Number ： Edit > Zone Information > Zone Edit - Conventional Group
-
-
Emergency Mode Type
Description
-
-
42
Advertisement
