Advertisement
4 NXDN function
Making a Group Call (Group Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Group Call can be used to engage in 2-way group voice calls by initiating a call to a group.
The transceiver can initiate a call to the transceivers having the same Group ID by specifying the Group ID.
The transceiver can also initiate a call to all transceivers by specifying the Group ID for which "ALL" is
configured.
Group Call can be started by one of the following methods:
Group Call Mode (Standard Model Only):
While the transceiver is in Group Call Mode, the transceiver can initiate a Group Call by a user selecting a Group
ID configured in the Group ID List and then pressing the PTT switch.
Group Call from Selcall on PTT:
The transceiver initiates a Group Call when the PTT switch is pressed on a channel where "Group Call" is
configured for Call Type. The Group ID of the target transceiver can be configured by selecting one Group ID
from the Group ID List by using KPG-D6/ D6N.
Enter to Group Call Mode
(Standard Model Only)
Group call from ID List
Group Call from Selcall on PTT
-
ID, ID Name, Type, Alert Tone, Alert LED : Edit > NXDN > Group ID List
Call Type : Edit > Zone Information > Channel Edit > NXDN > Selcall on PTT
Press PF_BTN[Group]/PF_BTN[Group +
Status]/PF_BTN[Group + Short Message].
Transceiver behavior :
The Group ID List is displayed when Group Call Mode is
entered.
Press [<B]/[C>].
Transceiver behavior :
ID is decremented/incremented.
Press [PTT].
Transceiver behavior :
Group Call to the selected ID.
Select the Channel which "Group Call" is configured in Call
Type.
Press [PTT].
77
Advertisement
