Advertisement
4 NXDN function
Using Function Buttons (Mode Reset Timer)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Mode Reset Timer is the timer for canceling the standby status of further key entry in Function Mode, and for
canceling the function activation status of 2nd Function. By using this function, Function Mode does not need to
be disabled manually.
The function also helps by canceling the Function Mode automatically so as not to remain in Function Mode for
too long.
If no button is pressed before the amount of time configured in Mode Reset Timer expires, the transceiver
returns to the previous mode.
If a Function button is pressed, the transceiver waits for a function configured for 2nd Function to be activated,
and then Mode Reset Timer starts counting down. If no button is pressed before the amount of time configured
in Mode Reset Timer expires, the transceiver cancels waiting for the function to be activated. Mode Reset
Timer can be extended by button operation.
Mode Reset Timer is used for the following Function Modes.
2-tone Mode
Autodial Mode
Autodial Programming Mode
Channel Entry Mode
External Mic Sense Mode*
1
External Speaker Mode
Fixed Volume Mode*
1
Group Call Mode
Individual Call Mode
Maintenance Display Mode
Menu Mode
Mic Sense Mode*
1
Microphone Type Mode*
1
OST Mode (OST List)
Priority-channel Select Mode
Radio Check Mode*
1
Radio Inhibit Mode*
1
Radio Uninhibit Mode*
1
Remote Control Mode
RX Audio Equalizer Mode*
1
RX Audio Gain Control Mode*
Scrambler/Encryption Code Mode
Selcall Mode
Short Message Mode
Speaker Type Mode*
1
Squelch Level Mode
Stack Mode
Status Mode
Transceiver Password Mode*
TX Audio Equalizer Mode*
1
VOX Gain Level Mode
1
*
Modes entered only from Menu Mode.
2
"PASSWORD" reappears on the display when the duration configured in Mode Reset Timer elapses.
*
-
-
Mode Reset Timer : Edit > Optional Features > Optional Features 1 > Common 1
1
2
-
55
Advertisement
