Advertisement
5 ANALOG function
FleetSync - Target
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Fleet and ID (Target):
Fleet and ID (Target) are the target transceiver's FleetSync IDs used to send the following Status Messages
and Short Messages.
Power-on Status
Power-off Status
A Status Message that is sent by selecting a status number or directly entering a status number after the
transceiver enters Status Mode by pressing the Status button
A Status Message that is sent by selecting a status number or directly entering a status number after the
transceiver enters Status Mode by a user selecting "Status" from Menu Mode
A Status Message that is sent by pressing any of the PF buttons having "Call 1" to "Call 6" allocated
A Short Message that is sent by entering a text string after the transceiver enters Short Message Mode by
pressing the Short Message button.
A Short Message that is sent by entering a text string after the transceiver enters Short Message Mode by a
user selecting "Short Message" from Menu Mode.
Fleet and ID (Target) can be configured using KPG-D6/ D6N. The FleetSync ID of the base station that
manages operations is normally configured.
Power-on Status:
Power-on Status allows the transceiver to send the selected Status Message when the transceiver is turned
ON.
Using the Power-on Status, the base station can recognize that the transceiver has been turned ON.
The transceiver sends the message to the Target Fleet/ ID of the system to which the channel selected when the
transceiver is turned ON belongs.
Power-off Status:
Power-off Status allows the transceiver to send the selected Status Message when the transceiver is turned
OFF.
Using the Power-off Status, the base station can recognize that the transceiver has been turned OFF.
The transceiver sends the message to the Target Fleet/ ID of the system to which the channel selected when the
transceiver is turned OFF belongs.
-
In Power-on Status, If Transceiver Password is used at the same time, a Status Message is sent when the
transceiver is turned ON and the transceiver migrates from Transceiver Password Mode to user mode.
Fleet, ID, Power-on Status, Power-off Status : Edit > FleetSync > Target > Fleet
Transceiver Password : Edit > Optional Features > Optional Features 1 > Common 1
-
115
Advertisement
