Advertisement
5 ANALOG function
FleetSync - ID List
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
To make Selective Calls, the desired FleetSync IDs need to be preconfigured in the transceiver by using
KPG-D6/ D6N prior to use of the transceiver. A maximum of 1,000 FleetSync IDs can be configured for
FleetSync ID List.
Configuration
For configuring the Fleet of the FleetSync ID. Fleet can be set to "ALL" or a value
Fleet
between 100 and 349. "ALL" allows initiation of a call to all Fleets.
For configuring the ID of the FleetSync ID. Fleet can be set to "ALL" or a value
ID
between 1000 and 4999. "ALL" allows initiation of a call to all IDs.
ID Name
The caller's ID Name is configured. A maximum of 14 characters can be
configured for the ID Name.
If the ID Name of the transmitting transceiver is configured in the ID List, the ID
Name of the transmitting transceiver appears when the transceiver receives a
Selective Call.
Type
The permission or inhibition of transmission of the receiving party
can be configured.
An ID for which "RX Only" is configured in Type does not appear on the ID
selection display in Selcall Mode, and a user cannot select the ID in Selcall
Mode.
If the transceiver receives a call from an ID for which "RX Only" is configured in
Type, the caller's ID Name appears. In this case, a user cannot initiate a call to
the party even if the user attempts to respond by pressing the PTT switch.
Alert Tone
Selcall:
The tone type sounding from the transceiver can be configured for a Selective
Call from the FleetSync IDs registered in the ID List.
Paging Call:
The tone type sounding from the transceiver can be configured for a Paging Call
from the FleetSync IDs registered in the ID List.
Alert LED
Selcall:
The color of flashing LED can be configured for a Selective Call from the FleetSync
IDs configured in the ID List.
Paging Call:
The color of flashing LED can be configured for a Paging Call from the FleetSync
IDs configured in the Individual ID List.
-
To use Alert LED, Selective Call Alert LED needs to be enabled.
Fleet, ID, ID Name, Type, Alert Tone (Selcall, Paging), Alert LED (Selcall, Paging) :
Edit > FleetSync > ID List
ID List
Description
-
113
Advertisement
