Advertisement
5 ANALOG function
Using a Channel Being Used by Other Parties (BCL Override)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Data Transmit with QT/DQT
Type
Description
Operating the transceiver
Note
Configuration using FPU
Stopping the scan temporarily during Priority Scan (AC Control)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed (Alert Tone)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Configuring the Alert Tone Pattern (Special Alert Tone)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
Data Transmit with QT/DQT is a function for overlaying the QT tone or DQT code configured for the channel
during data transmission.
This function is available on the channels that send a Status Message or Short Message. It is also used during
data transmission using an external device.
When a QT tone or DQT code is used, such as on a repeater, enabling this function makes it possible to transmit
data by overlaying the QT tone or DQT code.
When audio and data transmission are carried out concurrently on the same channel, you can disable this
function to transmit data without overlaying the QT tone or DQT code to make the audio sound transmitted
inaudible during data transmission.
-
-
Data Transmit with QT/DQT: Edit > Optional Features > Optional Features 1 > Common 1
'■ Standard model
■ Basic model
AC Control is configured whether to stop the scan temporarily during a priority scan by just receiving a carrier
without having to decode QT/DQT even when QT/DQT is configured for a priority channel.
AC Control functions for a priority channel with "Analog" or "Mixed" configured in Channel Type.
Configuration
Enabled
Enables the capability to reset QT/DQT signaling and automatically detect a
carrier on a priority channel.
Disabled
Disables the capability to reset QT/DQT signaling and automatically detect a
carrier on a priority channel.
-
This function can be only used in an Analog Conventional system.
AC Control : Edit > Scan Information > Scan
Channel Type : Edit > Zone Information > Channel Edit > General
'■ Standard model
■ Basic model
Alert Tone is configured whether the intermittently emitted Alert tone stops when the length of time configured in
Auto Reset Timer elapses.
-
This function cannot be configured if "Off" is configured in Auto Reset Timer.
Alert Tone :
Edit > DTMF > Decode > Auto Reset
Edit > 2-tone > Decode (2-tone 1 to 4) > Auto Reset
Edit > FleetSync > General 2 > Auto Reset
Edit > MDC-1200 > General 1 > Auto Reset
Auto Reset Timer : Edit > DTMF > Decode > Auto Reset
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
-
-
AC Control
Description
-
-
-
104
Advertisement
