Advertisement
3 DMR function
Making a Group Call (Group ID List)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making a Group Call (Group ID Scan)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Preventing the Functions Working with Group Call Reception from Activating (Group Call Alert Inhibit)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
The transceiver uses a Group ID configured in the Group ID List to initiate a Group Call in a DMR Conventional
system.
The desired Group IDs must be preconfigured using KPG-D6/ D6N for the transceiver to initiate a Group Call.
A maximum of 1,000 Group IDs can be configured in the Group ID List.
Configuration
ID
A Group ID can be configured in the range between 1 and 16776415, or in the
range of ALL.
ALL allows initiation of a call to all IDs.
ID Name
The caller's ID Name is configured. A maximum of 8 characters can be
configured for the ID Name.
If the ID Name of the group is configured in the Group ID List, the ID Name
appears when the transceiver receives a call. If the ID Name is not configured in
the Group ID List, the Group ID List number appears.
Type
The permission or inhibition of transmission of the receiving party can be
configured.
An ID for which "Receive Only" is configured for Type does not appear on the
ID selection display in Group Call Mode, and a user cannot select the ID in Group
Call Mode.
If the transceiver receives a call from an ID for which "Receive Only" is
configured for Type, the caller's ID Name appears. In this case, a user cannot
initiate a call to the party even if the user attempts to respond by pressing the PTT
switch.
Alert Tone
The tone type sounding from the transceiver can be configured for a Group Call
from the Group IDs registered in the Group ID List.
Alert LED Color
The color of flashing LED can be configured for a Group Call from the Group IDs
registered in the Group ID List.
-
To use Alert LED Color, Selective Call Alert LED needs to be enabled.
ID, ID Name, Type, Alert Tone, Alert LED : Edit > DMR > Group ID List
'■ Standard model
■ Basic model
Group ID Scan is the function to standby to receive a Group Call from all Group IDs in a DMR Conventional
system.
If this function is enabled, the transceiver is on standby to receive a Group Call from all Group IDs configured for
Group ID List.
If this function is disabled, the transceiver is on standby to receive only the Group Calls from the Group IDs
configured for Call Type or for Persistent Group ID (DMR).
-
This function can be used only if "Group Call" is configured for Call Type.
Group ID Scan : Edit > Zone Information > Channel Edit > DMR
Group ID : Edit > DMR
Call Type : Edit > Zone Information > Channel Edit > DMR > Selcall on PTT
Persistent Group ID (DMR) : Edit > Zone Information > Zone Edit - Conventional Group
'■ Standard model
■ Basic model
Group Call Alert Inhibit is the function that disables the Alert Tone, Selective Call Alert LED, and Caller ID
Stack functions when the transceiver receives a Group Call.
-
-
Group Call Alert Inhibit : Edit > DMR > General
Group ID List
Description
-
-
-
27
Advertisement
