Kenwood NX-1200 Series Function Reference page 130

5 ANALOG function
Using Scan (Scan)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Using Scan (Scan Type)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Scanning All Target Zones for Scanning (Multi Scan)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Scanning the Specific Channel Preferentially (Priority Scan)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Scanning the Specific Channel Preferentially (Priority Zone-Channel)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model ■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model ■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model ■ Basic model
In an Analog Conventional system, by using Multi-Zone Scan, the transceiver can scan all channels to be
scanned in the target zones.
If a scan starts in the zone where "Multi-Zone" is configured in Scan Type, Multi-Zone Scan is executed. Or, if
the transceiver migrates during the scan to the zone where "Multi-Zone" is configured in Scan Type, Multi-Zone
Scan is executed.
Display during Scan Temporary Stop
Display during Scan Off
-
Scan Type, Selected Channel Scan, Revert Channel Display, Scan LED :
Edit > Scan Information > Scan
PF_BTN[Scan], PF_BTN[Menu] : Edit > Button Assignment > Side, Front
Scan Add : Edit > Zone Information > Channel Edit > General
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
-
-
Transceiver behavior :
 The
icon blinks while paused.
 The Scan LED is turned off.
 Press the PF_BTN[Scan].
Transceiver behavior :
 Tone B sounds and scan is ended.
 Scan icon
is turned off.
 Selected channel is displayed.
 The Scan LED is turned off.
-
-
130