Advertisement
4 NXDN function
Configuration Related to Transmission and Reception in Emergency Mode (Emergency Mode Type)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Configuration Related to Transmission and Reception in Emergency Mode (Emergency Profile)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Emergency Mode Type is the function to determine whether the received audio or various tones are muted
while the transceiver is in Emergency Mode.
Configuration
Silent
The transceiver mutes the received audio and various tones while in Emergency
Mode.
Audible
The transceiver emits the received audio and various tones in the same manner
as in normal mode even while in Emergency Mode.
-
-
Emergency Mode Type : Edit > Emergency Information > Profiles > Page 2 > Option
'■ Standard model
■ Basic model
The transceiver can have a maximum of 8 configurations related to transmission and reception in Emergency
Mode as the Emergency Profile. By allocating Emergency Profile to each zone or channel, the Emergency
behavior of the transceiver can vary depending on the zone or channel.
The functions that can be configured as an Emergency Profile are as follows:
・ Emergency Channel Type
・ Emergency Zone-Channel
・ Emergency Mode Type
・ Emergency Cycle
・ Locator Tone at TX-start
・ Transmit Duration
・ Locator Tone at TX-end
・ Receive Duration
・ TX/RX LED in Emergency
-
-
Emergency Profile Number : Edit > Zone Information > Zone Edit - Conventional Group
Emergency Mode Type
Description
-
-
89
Advertisement
