Advertisement
5 ANALOG function
Single Selcall
Type
Description
Operating the transceiver
Note
Configuration using FPU
Sending a DTMF Code by Selecting from a List (Autodial List)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
Single Selcall : Edit > MDC-1200 > General 1
'■ Standard model
■ Basic model
The DTMF code configured in Autodial List can be selected and sent.
The transceiver can enter Autodial Mode and the DTMF codes can be selected using one of the following
operations:
PF_BTN[Autodial] :
Pressing the PF_BTN[Autodial] places the transceiver in Autodial Mode.
PF_BTN[Menu] :
Pressing the PF_BTN[Menu] to enter Menu Mode and then selecting "Autodial" places the transceiver in
Autodial Mode.
Keypad entry:
If "Autodial" is configured in Keypad Operation, pressing a button on the keypad causes the transceiver to enter
Shortcut Entry Mode for Autodial Mode.
-
DTMF Name, Code : Edit > DTMF > Autodial List
Button Assignment : Edit
-
Press the PF_BTN[Autodial].
Press the [< B] or [C >] button to select the DTMF code to be
sent from the Autodial List.
122
Advertisement
