Advertisement
4 NXDN function
Indication and Display (Selective Call Alert LED)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Indication and Display (Optional Signaling LED)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Selective Call Alert LED is the function to make the LED flash when the transceiver receives a call using an
NXDN ID.
A user can notice by the LED that the transceiver is receiving a call.
One of the 7 colors can be used to make the LED flash, and the flashing color can be configured for each type of
call.
Yellow
Purple
Blue
Light Blue
Red
Green
White
-
-
Selective Call Alert LED :
Edit > NXDN > Conventional
Individual Call, Individual Call Incoming, Group Call, Paging Call :
Edit > NXDN > Conventional > LED Color
'■ Standard model
■ Basic model
Optional Signaling LED is the function to make the LED flash yellow when the Optional Signaling matches.
A user can notice by the LED that the transceiver is receiving a call.
If the matching state of Optional Signaling is disabled when the buttons on the transceiver are pressed, or when
the time configured in Auto Reset Timer elapses, the LED is turned off.
However, if Selective Call Alert LED is enabled, the LED flashes according to the configuration in Selective Call
Alert LED even if Optional Signaling LED is enabled.
-
-
Optional Signaling LED : Edit > NXDN > Conventional
-
-
61
Advertisement
