Advertisement
5 ANALOG function
Sending the Received Unit ID from the Communication Port (Serial Output)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making a Group Call (Group Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making a Group Call (Group ID (List))
Type
Description
Operating the transceiver
Note
Configuration using FPU
Own ID (FleetSync)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
Fleet, ID, ID Name, Type, Alert Tone (Selcall, Paging), Alert LED (Selcall, Paging) :
Edit > FleetSync > ID List
ID Type, ID, Fleet ID, Group ID, ID Name, ACK Request, Alert Tone (Selcall, Call Alert), Alert LED (Selcall,
Call Alert) :
Edit > MDC-1200 > ID List
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
'■ Standard model
■ Basic model
To initiate various communications using FleetSync, a Fleet, an ID the identification code of a transceiver, needs
to be configured for the transceiver.
FleetSync communication uses a 7-digit identification code (FleetSync ID) that is made up of a 3-digit Fleet (100
to 349) and a 4-digit ID (1000 to 4999).
Each transceiver is identified by its FleetSync ID. To initiate various communications using FleetSync, an own
FleetSync ID (Fleet/ ID) needs to be configured for the transceiver. One Fleet/ ID can be configured for each
transceiver.
-
-
Fleet, ID, Global ID :
Edit > Zone Information > Zone Edit - Conventional Group > ID (Own) > FleetSync
-
-
-
-
110
Advertisement
