Advertisement
3 DMR function
Automatically Transmitting and Receiving in Emergency Mode (Emergency Cycle)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Emergency Cycle is the number of times that the transceiver toggles between transmission and reception for
an emergency in Emergency Mode.
Configuration
1 to 200
The transceiver repeats automatic transmission and automatic reception for the
configured number of times, and then the transceiver exits Emergency Mode.
Infinite
The transceiver continues to alternate between automatic transmission and
reception until the Emergency button is pressed again or the transceiver is
turned OFF.
Off
The transceiver does not automatically transmit and receive in Emergency Mode.
-
Automatically Transmitting and Receiving in Emergency Mode. The number of times for which the transceiver
toggles between transmission and reception, or the duration for a single session of automatic transmission or
reception for emergency in Emergency Mode can be configured. Also, the microphone sensitivity can be
changed and the Background Tone (1 beep) can be multiplexed on the audio to be transmitted in Emergency
Mode.
・ Emergency Cycle
・ Locator Tone at TX-start
・ Locator Tone at TX-end
・ Transmit Duration
・ Receive Duration
・ Emergency Microphone Sense
・ Background Tone Transmission
Emergency Cycle ： Edit > Emergency Information > Profiles > Page 2 > Option
Emergency Cycle
Description
-
40
Advertisement
