Advertisement
5 ANALOG function
Initiating Voice Communications (Basic Transmission and Reception) (Auto Reset Timer)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Monitor
Type
Description
Operating the transceiver
Note
Configuration using FPU
Turning off Selective Call Alert LED when Auto Reset Timer elapses (LED)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Restricting the Continuous Transmission Duration (Time-out Timer (TOT))
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Auto Reset Timer is the length of time from when the received DTMF code/ 2-tone code/ FleetSync ID/
MDC-1200 ID matches DTMF code/ 2-tone code/ FleetSync ID / MDC-1200 ID preconfigured for the transceiver
until the matching state is automatically reset.
A matching status means that a user can communicate using only a QT tone or DQT code after the FleetSync
ID/ MDC-1200 ID matches.
Auto Reset Timer is configured using KPG-D6/ D6N. Also, how the transceiver behaves after the length of time
configured in Auto Reset Timer elapses can be configured.
Configuration
Off
Auto Reset Timer does not function.
0 sec to 300 sec
After the configured time elapses, the matching state of DTMF code/ 2-tone code/
FleetSync ID / MDC-1200 ID is automatically reset.
-
-
Auto Reset Timer :
Edit > DTMF > Decode > Auto Reset
Edit > 2-tone > Decode (2-tone 1 to 4) > Auto Reset
Edit > FleetSync > General 2 > Auto Reset
Edit > MDC-1200 > General 1 > Auto Reset
'■ Standard model
■ Basic model
Monitor is configured whether the matching state of DTMF code/ 2-tone code/ FleetSync ID/ MDC-1200 ID is
reset when the length of time configured in Auto Reset Timer elapses.
-
This function cannot be configured if "Off" is configured in Auto Reset Timer.
Monitor :
Edit > DTMF > Decode > Auto Reset
Edit > 2-tone > Decode (2-tone 1 to 4) > Auto Reset
Edit > FleetSync > General 2 > Auto Reset
Edit > MDC-1200 > General 1 > Auto Reset
'■ Standard model
■ Basic model
LED is configured whether the flashing LED for the Selective Call Alert LED turns off when the length of time
configured in Auto Reset Timer elapses.
-
This function cannot be configured if "Off" is configured in Auto Reset Timer.
Optional Signaling LED is controlled by Monitor (Auto Reset).
LED :
Edit > DTMF > Decode > Auto Reset
Edit > 2-tone > Decode (2-tone 1 to 4) > Auto Reset
Edit > FleetSync > General 2 > Auto Reset
Edit > MDC-1200 > General 1 > Auto Reset
Auto Reset Timer : Edit > DTMF > Decode > Auto Reset
Optional Signaling LED : Edit > DTMF > Decode
'■ Standard model
■ Basic model
The description of this feature is the same as the feature with the same name in the DMR function.
-
-
-
Auto Reset Timer
Description
-
-
-
-
103
Advertisement
