Download Print this page

Kenwood NX-1200 Series Function Reference page 46

Hide thumbs Also See for NX-1200 Series:

Advertisement

3 DMR function
About Communication Security (Encryption)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Using Communication Security (Bit Scramble Encryption Type)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Encryption is the function that enhances secrecy in communications on the DMR digital channels by encrypting
voice data or user data such as a Short Message.
Encryption icon behavior when receiving
In case of bit scramble/ARC4
In case of bit scramble
In case of ARC4
-
-
'■ Standard model
■ Basic model
The bit scramble encryption type is the Encryption function embedded in the transceiver.
To transmit or receive a signal, the communication data can be encrypted or decrypted using the encryption key
data configured in the transceiver. By means of bit scramble, the transceiver can encrypt audio data only.
Configuration
For audio data, regardless of the configuration for Encryption Type (DMR), the
Enabled
received audio sounds from the speaker according to the audio control conditions
and the configuration in the Multi-key List.
Disabled
The following are the transceiver behaviors that may vary depending on the
configuration for Encryption Type (DMR) (Type 1 or Type 2):
 Type 1
The transceiver behaves in the same manner as a transceiver with Encryption
enabled.
 Type 2
No received audio sounds from the speaker.
-
 When unencrypted communication data is received, the transceiver emits the received audio from the
speaker according to the audio control conditions regardless of the Encryption status (enabled or disabled) or
configuration for Encryption Type (DMR).
Encryption Type : Edit > Encryption > DMR
Transceiver behavior :
• When carrier is not received:
When the Encryption status is On, the
case of bit scrambling method/ In the case of ARC4)
Transceiver behavior :
• When all of the following conditions are satisfied at the time of
receiving an encrypted carrier, the
Encryption Type = Type 1 regardless of the state of
Encryption.
If the Encryption status is Off and Encryption Type = Type 2, the
icon will not be lit. (In case of bit scramble)
• When receiving the encrypted carrier, the
when all of the following conditions are satisfied. (In case of
ARC 4)
Encryption Type
Description
-
46
icon lights up. (In the
icon blinks when
icon blinks

Advertisement

loading

This manual is also suitable for:

Nx-1300 seriesNx-1200 n k2Nx-1200 n кNx-1300 n k5Nx-1300 n k4Nx-1200 d k2 ... Show all