Advertisement
4 NXDN function
Scanning All Target Zones for Scanning (Multi Scan)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Scanning the Specific Channel Preferentially (Priority Scan)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
In an NXDN Conventional system, by using Multi Scan, the transceiver can scan all channels to be scanned in
the target zones.
If a scan starts in the zone where "Multi-Zone" is configured in Scan Type, Multi Scan is executed.
Or, if the transceiver migrates during the scan to the zone where "Multi-Zone" is configured in Scan Type, Multi
Scan is executed.
Display during Scan Temporary Stop
Display during Scan Off
-
Scan Type, Selected Channel Scan, Revert Channel Display, Scan LED :
Edit > Scan Information > Scan
PF_BTN[Scan]
PF_BTN[Menu]
Edit > Button Assignment > Side, Front
Scan Add :
Edit > Zone Information > Channel Edit > General
'■ Standard model
■ Basic model
Priority Scan is the function to prioritize and scan the target channels.
This function can be used for Single Scan, or Multi Scan in a Conventional channel.
If a Priority Channel is configured, the transceiver monitors Priority Channel by executing Lookback even when
receiving on a normal channel.
On the channel where Priority 1 has the highest priority, Lookback is not executed while receiving on Priority 1.
Priority 2 is the channel prioritized next to Priority 1; therefore, Lookback is executed on Priority 1 while receiving
on Priority 2.
Priority can be selected from "None", "Fixed", "Selected" and "Operator Selectable".
Configuration
None
No Priority Channel is configured.
Fixed
The channel configured using KPG-D6/ D6N is configured as the Priority
Channel. The Priority cannot be changed by operating the transceiver.
Selected
The channel selected on the Transceiver is configured as the Priority Channel.
Operator Selectable
The channel configured by a user in Priority-channel Select Mode.
-
"Operator Selectable" cannot be selected for the transceiver for Basic model.
Priority 1, Priority 1 Zone-Channel, Priority 2, Priority 2 Zone-Channel :
Edit > Scan Information > Scan
Transceiver behavior :
The
icon blinks while paused.
The Scan LED is turned off.
Press PF_BTN[Scan].
Transceiver behavior :
Tone B sounds and scan is ended.
Scan icon
is turned off.
Selected channel is displayed.
The Scan LED is turned off.
Priority
Description
-
96
Advertisement
