Advertisement
3 DMR function
Locking the Transceiver Buttons (Button Lock/ Auto Button Lock Timer)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Display Functions of the Display (Display Format)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Lighting the Backlight (Auto Backlight)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Button Lock is the function to disable the transceiver button operation.
This function prevents the incorrect operation of the transceiver by physical contact while carrying the
transceiver, such as around the waist.
Auto Button Lock Timer is the function to automatically enable the Button Lock when no button is operated
after the Button Lock is disabled.
-
Buttons assigned with the following functions can be used even while the Button Lock is enabled:
・ Emergency
・ Backlight
・ Battery Status
・ Call Response
・ Clear
・ Function
・ Button Lock
・ Monitor
・ Monitor Momentary
・ Squelch Off
・ Squelch Off Momentary
・ Save Log Data
If no button is operated for the amount of time configured in Auto Button Lock Timer after the Button Lock is
disabled, the Button Lock is automatically enabled.
Front Buttons ： Edit > Button Assignment > General > Button Lock
： Edit > Button Assignment > General > Button Lock
Side Buttons
： Edit > Button Assignment > General > Button Lock
PTT Switch
： Edit > Button Assignment > General > Button Lock
Selector
Volume Control ： Edit > Button Assignment > General > Button Lock
Auto Button Lock Timer ： Edit > Optional Features > Optional Features 1 > Common 1
'■ Standard model
□ Basic model
Display Format is the function to display the Channel Name or both the zone number and channel number on
the display.
Configuration
Channel Name
Displays the Channel Name.
Zone-Channel Number
Displays both the zone number and channel number.
-
Refer to [Display Format] button assignment for details on how to change the Display Format.
Display Format ： Edit > Optional Features > Optional Features 1 > Common 1
'■ Standard model
□ Basic model
The backlight is equipped on the back side of the LCD on the transceiver. By lighting the backlight, the LCD can
be viewed in dark places or at night.
Pressing the Backlight button toggles the backlight between On and Off.
Auto Backlight is enabled, the backlight lights when operating any button of the transceiver, or when receiving
a call.
-
-
Backlight Timer, PTT Press, Any Operation, Call/Message Receive :
Edit > Optional Features > Optional Features 1 > Common 1 > Auto Backlight
-
Display Format
Description
-
-
6
Advertisement
