Advertisement
3 DMR function
Configuration Related to Transmission and Reception in Emergency Mode (Emergency Alarm (DMR))
Type
Description
Operating the transceiver
Note
Configuration using FPU
Other Functions in Emergency Mode (Emergency Channel Lock)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Zone-channel Functioning in Emergency Mode (Emergency Channel Type)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
Emergency Alarm is the function to send an Emergency Alarm before the transceiver enters Emergency Mode
to notify the base station that the transceiver is in an Emergency situation.
Using this function can reliably notify the base station that the transceiver is in an Emergency situation.
-
After sending an Emergency Alarm, if the transceiver receives no acknowledgment until the length of time
configured for Maximum ACK Wait Time elapses, the transceiver resends the Emergency Alarm. If the
transceiver still cannot receive an acknowledgment after sending the Emergency Alarm 5 times, the transceiver
enters Emergency Mode.
Emergency Alarm (DMR) ： Edit > Emergency Information > General
'■ Standard model
■ Basic model
Emergency Channel Lock is the function to disable changing a zone or channel while the transceiver is in
Emergency Mode.
If this function is enabled, a zone or channel cannot be changed while the transceiver is in Emergency Mode.
If this function is disabled, a zone or channel can be changed while the transceiver in Emergency Mode is not
transmitting.
-
Emergency Channel Lock ： Edit > Emergency Information > General
'■ Standard model
■ Basic model
Emergency Channel Type is the type of a channel used when the transceiver is placed in Emergency Mode.
Configuration
Selected Channel
When the transceiver enters Emergency Mode, the transceiver resets the
migration state of channels, such as Home Channel, and then the transceiver
executes Emergency on the previously selected channel.
Preset Channel
After entering Emergency Mode, the transceiver migrates to the Zone-channel
configured in Emergency Zone-Channel and then executes the Emergency
behavior.
-
If "Preset Channel" is configured in Emergency Channel Type, a channel with "Site Roaming" configured
cannot be configured in Emergency Zone-channel.
Emergency Channel Type ： Edit > Emergency Information > Profiles > Page 2 > Emergency Channel
-
-
Emergency Channel Type
Description
-
39
Advertisement
