Kenwood NX-1200 Series Function Reference page 36

3 DMR function
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Revert Channel Display
(Site Roaming))
Type
Description
Operating the transceiver
Note
Configuration using FPU
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Site Roaming LED)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Migrating Automatically to the Site Providing Better Radio Environment (Site Roaming) (Link Delay Time)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
□ Basic model
Site Roaming is the function to migrate automatically to the site (channel) providing better radio environment if
the transceiver is operated in a DMR Conventional system.
The transceiver receives a synchronization signal transmitted from the repeaters in multiple sites at regular time
intervals, and detects the RSSI level. Therefore, the transceiver migrates automatically to the channel providing
better radio environment.
This function can be used by configuring the Site Roaming (DMR) channels for each zone by using KPG-D6/
D6N.
Revert Channel is the Zone-channel which is used when the transceiver transmits by pressing the PTT switch
during the scan.
The Revert Channel is displayed according to the configuration of Revert Channel Display.
Display during Site Roaming operation
(Revert Channel Display = Disable)
Display during Site Roaming operation
(Revert Channel Display = Enable)
-
Revert Channel Display : Edit > Scan Information > Site Roaming (DMR) > Indicator
'■ Standard model
■ Basic model
Site Roaming LED is the function to notify a user visually that the transceiver is executing Site Roaming.
When the transceiver starts Site Roaming, LED can flash with one of the following 7 colors:
 Yellow
 Purple
 Blue
 Light Blue
 Red
 Green
 White
-
 The basic model is only Green.
Site Roaming LED : Edit > Scan Information > Site Roaming (DMR) > Indicator
'■ Standard model ■ Basic model
The length of time until the repeater in each site is activated may vary depending on the site. Link Delay Time is
the function to configure the length of time to tolerate a variation in time of when each repeater is activated by
delaying the time to start searching for a signal on other channels.
-
-
Link Delay Time : Edit > Scan Information > Site Roaming (DMR) > Timer
 Select a Site Roaming zone.
Transceiver behavior :
 Site Roaming is started.
 Scan icon
is displayed.
 "ROAMING" is displayed on the main text.
 The items displayed on the icon area depend on the Revert
Channel.
 The LED blinks according to the Site Roaming LED setting.
Transceiver behavior :
 Site Roaming is started.
 Revert Channel is displayed.
 Scan icon
is displayed.
 The LED blinks according to the Site Roaming LED setting.
-
-
36