Advertisement
3 DMR function
Sending and Receiving a Short Message (Short Data Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Sending and Receiving a Short Message (Short Data Call) (Short Message List)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
□ Basic model
Short Data Call is the message communication function to send and receive a text string. Information which is
difficult to send by voice, such as an address or a telephone number, can be reliably sent.
Entering Short Message Mode
(If the message is more than 8 digits)
For example: Message is
"PLEASE PICK ME UP AT THE OFFICE."
Before and after scrolling
[<B]
[<B]
-
Short Message Stack : Edit > Optional Features > Optional Features 1 > Common 4 > Stack Condition
DMR Message Type : Edit > DMR > General
'■ Standard model
□ Basic model
To use a Short Message, the status to be sent must be preconfigured in the transceiver by using KPG-D6/ D6N
prior to the transmission.
A maximum of 10 lists can be configured in the Short Message List.
-
A maximum of 23 characters/ list
Short Message : Edit > DMR > Short Message List
To send Short Message to Base ID, press PF_BTN[Short
Message].
To send Short Message by Individual Call, press
PF_BTN[Individual + Short Message], select or manually
input the Unit ID, then press [S].
To send Short Message by Conventional Group Call, press
PF_BTN[Group + Short Message], select the Group ID, then
press [S].
Transceiver behavior :
Short Message Mode is entered and Short Message List is
displayed.
Press [<B]/[C>].
Transceiver behavior :
Short Message is incremented/decremented.
In Short Message List display, press [Side 2].
Transceiver behavior :
Tone A sounds and Short Message View display is entered.
Short Message is displayed on the main text.
-
32
Advertisement
