Kenwood NX-1200 Series Function Reference page 112

5 ANALOG function
FleetSync - GPS Combination
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model ■ Basic model
Sending GPS Data Together With Operation of the PTT Switch:
The transceiver can send GPS data by adding the GPS data to the PTT ID (FleetSync) of the transmitting
transceiver.
To use this function, PTT ID for GPS Combination must be enabled by using KPG-D6/ D6N.
GPS data is added to the PTT ID as follows according to the configurations for PTT ID and GPS Report Timing.
GPS Report Timing
BOT
EOT
Both (BOT)
Both (EOT)
Both
Sending GPS Data Together With Status Call:
The transceiver can send GPS data by adding the GPS data to a Status Message using FleetSync.
To use this function, Status for GPS Combination must be enabled by using KPG-D6/ D6N. The range of
status numbers (Combination Status Range) to which GPS data can be added can be configured.
Sending GPS Data Together With Emergency Call:
The transceiver can send GPS data by adding the GPS data to the Emergency ID (FleetSync).
To use this function, Emergency for GPS Combination must be enabled by using KPG-D6/ D6N.
-
-
PTT ID, GPS Report Timing, Status, Combination Status Range, Emergency :
Edit > FleetSync > GPS > GPS Combination
Timing for Adding GPS Data
PTT ID (Analog)
Off BOT
- BOT+GPS
- BOT
- BOT+GPS
- BOT+GPS
- BOT+GPS
Timing for GPS Combination (PTT ID)
Timing to Send GPS Combination (Status)
Timing to Send Combination (Emergency)
-
112
EOT Both
EOT BOT+GPS
EOT
EOT+GPS EOT
EOT+GPS
EOT+GPS BOT+GPS
EOT
EOT+GPS BOT
EOT+GPS
EOT+GPS BOT+GPS
EOT+GPS