Advertisement
4 NXDN function
Using a Channel Being Used by Other Parties (BCL Override)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Making an Individual Call (Individual Call)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
■ Basic model
BCL Override is the function to transmit on a busy channel even if Busy Channel Lockout is activated and
transmission is restricted.
-
This function also works while the transceiver is transmitting using the VOX function.
For a transmission using VOX, Busy Channel Lockout is temporarily disabled and the transceiver can
transmit if audio is input within 500 ms after audio input terminates.
BCL Override : Edit > Zone Information > Zone Edit - Conventional Group
'■ Standard model
■ Basic model
Individual Call can be used to initiate a call to a target transceiver individually to establish voice calls.
By specifying a Unit ID, the transceiver can initiate a call to the transceiver having the Unit ID.
Individual Call can be started by one of the following methods:
Individual Call Mode (Standard Model Only):
While the transceiver is in Individual Call Mode, the transceiver can initiate an Individual Call by a user selecting
a Group ID configured in the Group ID List and then pressing the PTT switch.
Individual Call from Selcall on PTT:
The transceiver initiates an Individual Call when the PTT switch is pressed on a channel where "Individual Call"
is configured for Call Type. The Group ID of the target transceiver can be configured by selecting one Group ID
from the Group ID List by using KPG-D6/ D6N.
Enter Individual Call Mode
(Standard Model Only)
Press PF_BTN[Individual]
Select an ID in Individual Call Mode
Individual Call from Selcall on PTT
-
ID, ID Name, Type, Alert Tone (Individual, Paging), Alert LED (Individual, Paging) :
Edit > NXDN > Unit ID List
Call Type : Edit > Zone Information > Channel Edit > NXDN > Selcall on PTT
Press the PTT switch while transmission is restricted by Busy
Channel Lockout.
Release the PTT switch, then press the PTT switch again
within 500 ms.
Busy Channel Lockout is temporarily disabled, and the
transceiver starts transmitting.
Press PF_BTN[Individual]/PF_BTN[Individual +
Status]/PF_BTN[Individual + Short Message].
Transceiver behavior :
The ID List is displayed when Individual Call Mode is entered.
The last called Unit ID is displayed.
Press [<B]/[ C>].
Transceiver behavior :
ID is decremented/incremented.
73
Advertisement
