Advertisement
3 DMR function
Indication and Sound in Emergency Mode (Emergency Text / Text)
Type
Description
Operating the transceiver
Note
Configuration using FPU
Automatically Transmitting and Receiving in Emergency Mode (Locator Tone at TX-start/ Locator Tone at TX-end)
Type
Description
Operating the transceiver
Note
Configuration using FPU
'■ Standard model
□ Basic model
Emergency Text is the function to display the text on the transceiver display while in Emergency Mode.
If this function is enabled, the text configured in Text appears on the display when the transceiver enters
Emergency Mode.
Emergency Mode Display (Emergency Text =
Disable, Emergency Display = Selected
Channel)
Enter Emergency
Emergency Mode Display (Emergency Text =
Enable, Text = "EMG", Emergency Display =
Selected Channel)
Enter Emergency
-
Emergency Text, Text :
Edit > Emergency Information > General
'■ Standard model
■ Basic model
Locator Tone at TX-start is the duration to emit an Alert Tone which notifies that the transceiver will start
transmission before the transceiver starts automatic transmission in Emergency Mode.
The transceiver automatically repeat transmitting and receiving in Emergency Mode. When the transceiver
switches from reception to transmission, an Emergency Locator Tone (2 beeps) sounds from the transceiver for
the length of the time configured for Locator Tone at TX-start.
Locator Tone at TX-end is the duration to emit an Alert Tone which notifies that the transceiver has completed
an automatic transmission in Emergency Mode, and starts receiving.
The transceiver automatically repeat transmitting and receiving in Emergency Mode. When the transceiver
switches from transmission to reception, an Emergency Locator Tone (2 beeps) sounds from the transceiver for
the length of the time configured for Locator Tone at TX-end.
When the tone sounds, a user can easily recognize without viewing the transceiver that the transceiver is
about to automatically transmit in Emergency Mode. This tone can also be used to locate a user who is in
emergency situations.
When the tone sounds, a user can easily recognize without viewing the transceiver that the transceiver ends
to automatically transmit in Emergency Mode. This tone can also be used to locate a user who is in
emergency situations.
-
-
Locator Tone at TX-start, Locator Tone at TX-end :
Edit > Emergency Information > Profiles > Page 2 > Option
Press and hold PF_BTN[Emergency].
Transceiver behavior :
Emergency Mode is entered.
The currently selected channel or Emergency Zone-Channel
is displayed depending on the Emergency Display setting.
Press and hold PF_BTN[Emergency].
Transceiver behavior :
Emergency Mode is entered.
The emergency text configured in "Text" is displayed.
Press and hold PF_BTN[Emergency].
Transceiver behavior :
Emergency Mode is exited.
The emergency text display will be turned off.
-
43
Advertisement
