Dodge ZB 2005 Service Manual page 1442

Symptom:
DRIVER SQUIB 2 CIRCUIT OPEN
When Monitored and Set Condition:
DRIVER SQUIB 2 CIRCUIT OPEN
When Monitored: With the ignition on the ACM monitors the resistance of the Driver
Squib 2 circuits.
Set Condition: The ACM has detected an open circuit or high resistance in the Driver
Squib 2 circuits.
DRIVER AIRBAG CIRCUIT OPEN
CLOCKSPRING, DRIVER SQUIB 2 CIRCUIT OPEN
DRIVER SQUIB 2 LINE 1 OR LINE 2 CIRCUIT OPEN
ACM, DRIVER SQUIB 2 CIRCUIT OPEN
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
TEST
1 Turn the ignition on.
NOTE: Ensure that the battery is fully charged.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
SELECT ACTIVE or STORED DTC:
ACM - ACTIVE DTC
ACM - STORED DTC
NOTE: When reconnecting airbag system components the Ignition must be
turned off and the Battery must be disconnected.
POSSIBLE CAUSES
ACTION
Go To 2
Go To 5
61
AIRBAG
APPLICABILITY
All