Dodge ZB 2005 Service Manual page 1701

POWER DOOR LOCKS/RKE
PASSENGER/DRIVER DOOR UNLATCH RETURN SHORT TO GROUND
—
Continued
TEST
3 Disconnect the Body Control Module C2 connector.
Disconnect the Passenger Door Latch Motor connector.
Measure the resistance between ground and the Passenger Door Unlatch Return
circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Passenger Door Unlatch Return wire for a short to
→ Replace the Door Latch Motor.
No
4 Disconnect the Body Control Module C2 connector.
Disconnect the Driver Door Latch Motor connector.
Measure the resistance between ground and the Driver Door Unlatch Return circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Driver Door Unlatch Return wire for a short to ground.
→ Replace the Door Latch Motor.
No
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
320
APPLICABILITY
All
All