Dodge ZB 2005 Service Manual page 1474

Symptom:
PASSENGER OFF INDICATOR CIRCUIT SHORT TO GROUND
When Monitored and Set Condition:
PASSENGER OFF INDICATOR CIRCUIT SHORT TO GROUND
When Monitored: When the ignition is on, the ACM monitors the PAB Indicator Driver
circuit for voltage from the PAB On - Off indicator circuit.
Set Condition: The code will set if the ACM cannot detect voltage on the PAB Indicator
Driver circuit.
GAUGE CLUSTER CIRCUITS SHORT
PAB OFF INDICATOR CIRCUIT SHORT TO GROUND
ACM, PAB OFF INDICATOR DRIVER OPEN
PASSENGER AIRBAG INDICATOR DRIVER CIRCUIT OPEN
IOD FUSED B(+) CIRCUIT OPEN
OPEN GAUGE PACK
ACM, PASSENGER OFF INDICATOR CIRCUITS SHORT
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
TEST
1 Turn the ignition on.
NOTE: Ensure that the battery is fully charged.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
SELECT ACTIVE or STORED DTC:
ACM - ACTIVE DTC
ACM - STORED DTC
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
2 Turn the ignition off.
Turn PAB Off Indicator Switch to the PAB ON position.
Turn Ignition On, then wait 5 seconds for the bulb check to finish.
Is the Off Indicator illuminated with the OFF switch turned to the ON position?
Yes → Go To 3
→ Go To 5
No
POSSIBLE CAUSES
ACTION
Go To 2
Go To 8
93
AIRBAG
APPLICABILITY
All
All