Dodge ZB 2005 Service Manual page 953

23 - 42 EXTERIOR
COWL SCREEN PANEL (Continued)
Fig. 5 WINDSHIELD WIPER ARMS
1 - WINDSHIELD WIPER ARM & BLADE
2 - WIPER ARM NUT CAP
3 - WIPER ARM NUT
4 - WIPER MODULE
5 - COWL PANEL
Fig. 6 COWL SCREEN PANEL
1 - FRESH AIR INLET PLENUM
2 - COWL SCREEN PANEL (RIGHT)
3 - COWL SCREEN PANEL (LEFT)
4 - WASHER HOSE CONNECT
FUEL FILL DOOR
REMOVAL
(1) Open the filler door and disconnect the filler
cap tether from the door. (Fig. 7)
(2) Remove the screws and remove the door.
Fig. 7 FUEL FILLER DOOR
1 - FUEL FILLER CAP
2 - REAR QUARTER PANEL
3 - FUEL FILLER DOOR
4 - FUEL FILLER DOOR BUMPER
INSTALLATION
(1) Install the fuel filler door and install the
screws.
(2) Tighten the screws to 7 N·m (65 in. lbs.).
(3) Connect the fuel cap tether to the door.
FUEL FILLER HOUSING
REMOVAL
(1) To remove the fuel filler housing, (Refer to 14 -
FUEL SYSTEM/FUEL
FILLER TUBE - REMOVAL)
INSTALLATION
(1) To install the fuel filler housing, (Refer to 14 -
FUEL SYSTEM/FUEL
FILLER TUBE - INSTALLATION)
FRONT WHEELHOUSE
SPLASH SHIELD
REMOVAL
(1) Remove the front wheel. (Refer to 22 - TIRES/
WHEELS - REMOVAL)
(2) Remove the two screws and two push pin fas-
teners. (Fig. 8)
(3) Remove the front splash shield.
(4) Remove the four fender screws.
(5) Remove the three lower push pin fasteners and
two inner screws. (Fig. 9)
(6) Remove the rear splash shield.
DELIVERY/FUEL TANK
DELIVERY/FUEL TANK
ZB