Dodge ZB 2005 Service Manual page 1708

*DRIVER DOOR SWITCH OR SWITCHES INOPERATIVE —
TEST
9 Disconnect the inoperative Driver Handle Switch connectors.
Measure the voltage of the Driver Door Switch Mux circuit in the Driver Handle
Switch connector.
Is the voltage above 4.5 volts?
Yes → Go To 10
→ Repair the Driver Door Switch Mux circuit for an open.
No
10 If there are no possible causes remaining, view repair.
Repair
11 Disconnect the Power Door Lock Switch connector.
Using a 12-volt test light connected to 12-volts, check the Driver Door Switch Return
circuit.
Does the test light illuminate brightly?
Yes → Go To 12
→ Repair the Driver Door Switch Return circuit for an open.
No
12 Disconnect the Driver Door Lock Switch connectors.
Measure the voltage of the Driver Door Switch Mux circuit.
Is the voltage above 4.5 volts?
Yes → Go To 13
→ Repair the Driver Door Switch Mux circuit for an open.
No
13 If there are no possible causes remaining, view repair.
Repair
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Replace the Driver Handle Switch.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Replace the Driver Door Lock Switch.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
327
Continued
APPLICABILITY
All
All
All
All
All