Dodge ZB 2005 Service Manual page 995

23 - 84 SEATS
SEAT ADJUSTERS (Continued)
Fig. 5 REAR ADJUSTER BOLTS
1 - SEAT ADJUSTER
2 - SEAT CUSHION
3 - REAR ADJUSTER BOLTS
Fig. 6 SIDE ADJUSTER BOLTS
1 - SEAT ADJUSTER
2 - SIDE ADJUSTER BOLTS
3 - SEAT CUSHION
(9) Position the seat cushion cover flaps back and
install the recliner handle and screw.
(10) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT BACK
REMOVAL
(1) Remove the seat. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL)
(2) Unzip the seat back cover and expose the
recliner bolts.
(3) Remove the recliner bolts and remove the seat
back. (Fig. 7)
Fig. 7 SEAT BACK
1 - SEAT BACK
2 - SEAT BACK RECLINER BOLTS
3 - RECLINER
4 - SEAT BACK CUSHION/COVER
INSTALLATION
(1) Install the seat back onto the recliners and
install the bolts.
(2) Tighten the bolts to 28 N·m (21 ft. lbs.).
(3) Complete seat back cover installation by zip-
ping up the cover.
(4) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT BACK COVER
REMOVAL
(1) Remove the seat. (Refer to 23 - BODY/SEATS/
SEAT - REMOVAL)
(2) Unzip the seat back cover and expose the
recliner bolts.
(3) Remove the recliner bolts and remove the seat
back. (Fig. 8)
(4) Disconnect the j-straps at the bottom of the
seat back.
(5) Remove the seat back cover hog rings.
ZB