Dodge ZB 2005 Service Manual page 1484

Symptom:
PASSENGER SEAT BELT TENSIONER CIRCUIT OPEN
When Monitored and Set Condition:
PASSENGER SEAT BELT TENSIONER CIRCUIT OPEN
When Monitored: When the ignition is On, the ACM monitors the resistance of the
Passenger Seat Belt Tensioner circuits.
Set Condition: The ACM has detected an open circuit or high resistance or open circuit in
the Passenger Seat Belt Tensioner circuits.
PASSENGER SEAT BELT TENSIONER OPEN
PASSENGER SEAT BELT TENSIONER LINE 1 OR LINE 2 CIRCUIT OPEN
ACM, PASSENGER SEAT BELT TENSIONER CIRCUIT OPEN
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
TEST
1 Ensure the battery is fully charged.
Turn the ignition on.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
SELECT ACTIVE or STORED DTC:
ACM - ACTIVE DTC
ACM - STORED DTC
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
POSSIBLE CAUSES
ACTION
Go To 2
Go To 5
103
AIRBAG
APPLICABILITY
All