Dodge ZB 2005 Service Manual page 1719

POWER WINDOWS
DRIVER WINDOW DOWN OUTPUT SHORT TO GROUND —
TEST
3 Turn the ignition off.
Disconnect the Driver Window Motor connector.
Disconnect the BCM C2 harness connector.
Measure the resistance between ground and the Driver Window Down Driver circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Driver Window Down Driver circuit for a short to
→ Replace the Body Control Module.
No
ACTION
ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
338
Continued
APPLICABILITY
All