Dodge ZB 2005 Service Manual page 1852

SYSTEM OVER VOLTAGE —
TEST
7 Turn the ignition off.
Visually inspect the related wiring harness. Look for any chafed, pierced, pinched, or
partially broken wires.
Visually inspect the related wire harness connectors. Look for broken, bent, pushed
out, or corroded terminals.
Refer to any Hotline letters or Technical Service Bulletins that may apply.
Ensure the battery is fully charged.
Inspect the vehicle for aftermarket accessories that may exceed the Generator
System output.
Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
Were any problems found?
Yes → Repair as necessary.
→ Test Complete.
No
Continued
ACTION
Perform ABS VERIFICATION TEST - VER 1.
31
BRAKES (CAB)
APPLICABILITY
All