Dodge ZB 2005 Service Manual page 998

ZB
SEAT CUSHION ASSEMBLY (Continued)
(7) Separate seat cushion from seat back.
Fig. 14 SEAT CUSHION
1 - RECLINER CABLE/CLIP
2 - SEAT CUSHION
3 - SEAT BACK
4 - J-STRAPS (6)
5 - RECLINER
INSTALLATION
(1) Position the seat cushion assembly and seat
back assembly into place.
(2) Connect recliner cable to the recliner and clip
cable seat frame.
(3) Install the seat back and recliners onto the
seat cushion and install the bolts.
(4) Tighten the bolts to 28 N·m (21 ft. lbs.).
(5) Install the child restraint anchorage bars and
install the bolts, if equipped.
(6) Tighten the bolts to 28 N·m (21 ft. lbs.).
(7) Install the seat belt buckle and install the bolt.
(8) Tighten the bolt to 40 N·m (30 ft. lbs.).
(9) Position the seat cushion cover flaps back and
install the recliner handle and screw.
(10) Install the seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION)
SEAT CUSHION COVER
REMOVAL
(1) Remove the seat adjuster. (Refer to 23 - BODY/
SEATS/SEAT ADJUSTERS - REMOVAL)
(2) Unclip the recliner cable and remove the seat
back assembly. (Fig. 15)
(3) Disconnect the cushion cover j-straps.
(4) Remove the cover/cushion from the frame.
(5) Remove the hog rings and remove the cover.
Fig. 15 SEAT CUSHION
1 - RECLINER CABLE/CLIP
2 - SEAT CUSHION
3 - SEAT BACK
4 - J-STRAPS (6)
5 - RECLINER
INSTALLATION
(1) Install the cover onto the seat cushion foam
and install new hog rings.
(2) Place the cushion/cover onto the cushion frame
and connect the j-straps.
(3) Position the seat back assembly into place and
clip the recliner cable to the frame.
(4) Install the seat adjuster. (Refer to 23 - BODY/
SEATS/SEAT ADJUSTERS - INSTALLATION)
SEATS 23 - 87